This is the latest recevied telemetry packets stored in our database for station/object 9W2FNX-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768258058 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1768258043 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1768258013 | 4.92 VDC | 0 | 0 | 0 | 0 |
| 1768202116 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1768202085 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1768202070 | 4.86 VDC | 0 | 0 | 0 | 0 |
| 1768201923 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1768201768 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 1768201751 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1768201736 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1768201721 | 4.98 VDC | 0 | 0 | 0 | 0 |
| 1768201706 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1768201691 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1768201676 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1768201613 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1768201518 | 4 VDC | 0 | 0 | 0 | 0 |
| 1768201503 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1768201487 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1768201472 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1768201448 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1768201433 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1768171919 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1768171904 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1768171889 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1768171872 | 4.29 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)