This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778682853 | 274 Count | 152 Count | 120 Count | 0 VDC | 0 VDC |
| 1778679251 | 270 Count | 150 Count | 118 Count | 0 VDC | 0 VDC |
| 1778677451 | 268 Count | 149 Count | 117 Count | 0 VDC | 0 VDC |
| 1778675651 | 266 Count | 148 Count | 116 Count | 0 VDC | 0 VDC |
| 1778673849 | 264 Count | 147 Count | 115 Count | 0 VDC | 0 VDC |
| 1778672049 | 262 Count | 146 Count | 114 Count | 0 VDC | 0 VDC |
| 1778670248 | 261 Count | 146 Count | 114 Count | 0 VDC | 0 VDC |
| 1778666647 | 258 Count | 145 Count | 113 Count | 0 VDC | 0 VDC |
| 1778664846 | 256 Count | 144 Count | 112 Count | 0 VDC | 0 VDC |
| 1778663046 | 254 Count | 143 Count | 111 Count | 0 VDC | 0 VDC |
| 1778661252 | 248 Count | 142 Count | 110 Count | 0 VDC | 0 VDC |
| 1778659451 | 247 Count | 142 Count | 110 Count | 0 VDC | 0 VDC |
| 1778657651 | 245 Count | 141 Count | 109 Count | 0 VDC | 0 VDC |
| 1778655850 | 242 Count | 139 Count | 107 Count | 0 VDC | 0 VDC |
| 1778654050 | 238 Count | 136 Count | 104 Count | 0 VDC | 0 VDC |
| 1778652249 | 236 Count | 135 Count | 103 Count | 0 VDC | 0 VDC |
| 1778650449 | 234 Count | 134 Count | 102 Count | 0 VDC | 0 VDC |
| 1778648647 | 232 Count | 133 Count | 101 Count | 0 VDC | 0 VDC |
| 1778646847 | 231 Count | 133 Count | 101 Count | 0 VDC | 0 VDC |
| 1778645046 | 229 Count | 132 Count | 100 Count | 0 VDC | 0 VDC |
| 1778643245 | 227 Count | 131 Count | 99 Count | 0 VDC | 0 VDC |
| 1778641445 | 225 Count | 130 Count | 98 Count | 0 VDC | 0 VDC |
| 1778639652 | 219 Count | 129 Count | 97 Count | 0 VDC | 0 VDC |
| 1778637850 | 217 Count | 128 Count | 96 Count | 0 VDC | 0 VDC |
| 1778636050 | 215 Count | 127 Count | 95 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)