This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771301805 | 178 Count | 305 Count | 164 Count | 4.03 VDC | 0 VDC |
| 1771298210 | 161 Count | 269 Count | 149 Count | 4.03 VDC | 0 VDC |
| 1771296413 | 152 Count | 250 Count | 141 Count | 4.03 VDC | 0 VDC |
| 1771294615 | 141 Count | 230 Count | 131 Count | 4.03 VDC | 0 VDC |
| 1771292819 | 123 Count | 203 Count | 114 Count | 4.03 VDC | 0 VDC |
| 1771291021 | 112 Count | 185 Count | 104 Count | 4.03 VDC | 0 VDC |
| 1771289224 | 95 Count | 160 Count | 88 Count | 4.03 VDC | 0 VDC |
| 1771287427 | 85 Count | 143 Count | 79 Count | 4.03 VDC | 0 VDC |
| 1771285630 | 76 Count | 127 Count | 71 Count | 4.03 VDC | 0 VDC |
| 1771283833 | 61 Count | 103 Count | 57 Count | 4.04 VDC | 0 VDC |
| 1771282036 | 47 Count | 81 Count | 44 Count | 4.03 VDC | 0 VDC |
| 1771280238 | 33 Count | 60 Count | 31 Count | 4.04 VDC | 0 VDC |
| 1771278441 | 20 Count | 41 Count | 19 Count | 4.04 VDC | 0 VDC |
| 1771276644 | 8 Count | 20 Count | 8 Count | 4.04 VDC | 0 VDC |
| 1771274846 | 527 Count | 1005 Count | 465 Count | 4.04 VDC | 0 VDC |
| 1771273049 | 512 Count | 979 Count | 451 Count | 4.04 VDC | 0 VDC |
| 1771271253 | 494 Count | 953 Count | 434 Count | 4.05 VDC | 0 VDC |
| 1771269455 | 482 Count | 933 Count | 423 Count | 4.05 VDC | 0 VDC |
| 1771267658 | 465 Count | 908 Count | 407 Count | 4.05 VDC | 0 VDC |
| 1771265860 | 454 Count | 888 Count | 397 Count | 4.05 VDC | 0 VDC |
| 1771264065 | 441 Count | 869 Count | 385 Count | 4.05 VDC | 0 VDC |
| 1771262267 | 429 Count | 849 Count | 374 Count | 4.06 VDC | 0 VDC |
| 1771260471 | 417 Count | 834 Count | 363 Count | 4.06 VDC | 0 VDC |
| 1771258673 | 408 Count | 818 Count | 355 Count | 4.06 VDC | 0 VDC |
| 1771256875 | 397 Count | 800 Count | 345 Count | 4.06 VDC | 5.44 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)