This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770116455 | 251 Count | 476 Count | 133 Count | 0 VDC | 0.08 VDC |
| 1770115552 | 249 Count | 472 Count | 132 Count | 0 VDC | 0.08 VDC |
| 1770114649 | 247 Count | 467 Count | 131 Count | 0 VDC | 0.08 VDC |
| 1770113746 | 244 Count | 461 Count | 129 Count | 0 VDC | 0.08 VDC |
| 1770112843 | 242 Count | 456 Count | 128 Count | 0 VDC | 0.08 VDC |
| 1770111940 | 241 Count | 455 Count | 128 Count | 0 VDC | 0.08 VDC |
| 1770111037 | 238 Count | 449 Count | 126 Count | 0 VDC | 0.08 VDC |
| 1770110134 | 235 Count | 443 Count | 124 Count | 0 VDC | 0.08 VDC |
| 1770109231 | 234 Count | 442 Count | 124 Count | 0 VDC | 0.08 VDC |
| 1770108328 | 233 Count | 441 Count | 124 Count | 0 VDC | 0.08 VDC |
| 1770107425 | 231 Count | 436 Count | 123 Count | 0 VDC | 0.08 VDC |
| 1770106522 | 228 Count | 430 Count | 121 Count | 0 VDC | 0.08 VDC |
| 1770105619 | 227 Count | 429 Count | 121 Count | 0 VDC | 0.08 VDC |
| 1770104716 | 224 Count | 422 Count | 119 Count | 0 VDC | 0.08 VDC |
| 1770103883 | 218 Count | 417 Count | 118 Count | 0 VDC | 0.08 VDC |
| 1770102980 | 215 Count | 411 Count | 116 Count | 0 VDC | 0.08 VDC |
| 1770102077 | 212 Count | 405 Count | 114 Count | 0 VDC | 0.08 VDC |
| 1770101174 | 210 Count | 400 Count | 113 Count | 0 VDC | 0.08 VDC |
| 1770100271 | 208 Count | 397 Count | 112 Count | 0 VDC | 0.08 VDC |
| 1770099369 | 205 Count | 389 Count | 110 Count | 0 VDC | 0.08 VDC |
| 1770098466 | 203 Count | 383 Count | 109 Count | 0 VDC | 0.08 VDC |
| 1770097563 | 201 Count | 380 Count | 108 Count | 0 VDC | 0.08 VDC |
| 1770096660 | 198 Count | 371 Count | 106 Count | 0 VDC | 0.08 VDC |
| 1770095757 | 197 Count | 368 Count | 106 Count | 0 VDC | 0.08 VDC |
| 1770094854 | 196 Count | 366 Count | 106 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)