This is the latest recevied telemetry packets stored in our database for station/object SQ8PDY-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773429090 | 124 Count | 459 Count | 116 Count | 0 VDC | 0 VDC |
| 1773427289 | 73 Count | 304 Count | 66 Count | 0 VDC | 0 VDC |
| 1773425488 | 64 Count | 260 Count | 58 Count | 0 VDC | 0 VDC |
| 1773423688 | 53 Count | 219 Count | 48 Count | 0 VDC | 0 VDC |
| 1773421887 | 44 Count | 172 Count | 40 Count | 0 VDC | 0 VDC |
| 1773420087 | 34 Count | 131 Count | 31 Count | 0 VDC | 0 VDC |
| 1773416485 | 18 Count | 69 Count | 17 Count | 0 VDC | 0 VDC |
| 1773414685 | 12 Count | 51 Count | 12 Count | 0 VDC | 0 VDC |
| 1773412884 | 227 Count | 1059 Count | 212 Count | 0 VDC | 0 VDC |
| 1773411084 | 159 Count | 855 Count | 145 Count | 0 VDC | 0 VDC |
| 1773409289 | 121 Count | 645 Count | 112 Count | 0 VDC | 0 VDC |
| 1773407488 | 102 Count | 538 Count | 94 Count | 0 VDC | 0 VDC |
| 1773405688 | 93 Count | 461 Count | 86 Count | 0 VDC | 0 VDC |
| 1773403887 | 82 Count | 408 Count | 76 Count | 0 VDC | 0 VDC |
| 1773402087 | 71 Count | 345 Count | 66 Count | 0 VDC | 0 VDC |
| 1773400286 | 57 Count | 199 Count | 53 Count | 0 VDC | 0 VDC |
| 1773398485 | 56 Count | 196 Count | 53 Count | 0 VDC | 0 VDC |
| 1773396685 | 52 Count | 177 Count | 50 Count | 0 VDC | 0 VDC |
| 1773394884 | 36 Count | 118 Count | 35 Count | 0 VDC | 0 VDC |
| 1773393084 | 12 Count | 53 Count | 12 Count | 0 VDC | 0 VDC |
| 1773391283 | 205 Count | 1007 Count | 184 Count | 0 VDC | 0 VDC |
| 1773389482 | 195 Count | 943 Count | 175 Count | 0 VDC | 0 VDC |
| 1773387688 | 176 Count | 847 Count | 161 Count | 0 VDC | 0 VDC |
| 1773385887 | 165 Count | 794 Count | 151 Count | 0 VDC | 0 VDC |
| 1773384086 | 163 Count | 781 Count | 150 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)