This is the latest recevied telemetry packets stored in our database for station/object SP3KON-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773440526 | 337 Count | 709 Count | 140 Count | 0 VDC | 0 VDC |
| 1773439625 | 335 Count | 706 Count | 139 Count | 0 VDC | 0 VDC |
| 1773438724 | 333 Count | 703 Count | 138 Count | 0 VDC | 0 VDC |
| 1773437823 | 331 Count | 696 Count | 137 Count | 0 VDC | 0 VDC |
| 1773436922 | 329 Count | 692 Count | 136 Count | 0 VDC | 0 VDC |
| 1773436021 | 327 Count | 687 Count | 135 Count | 0 VDC | 0 VDC |
| 1773435120 | 321 Count | 678 Count | 134 Count | 0 VDC | 0 VDC |
| 1773434219 | 319 Count | 673 Count | 133 Count | 0 VDC | 0 VDC |
| 1773433318 | 316 Count | 669 Count | 132 Count | 0 VDC | 0 VDC |
| 1773432417 | 312 Count | 661 Count | 130 Count | 0 VDC | 0 VDC |
| 1773431516 | 300 Count | 646 Count | 129 Count | 0 VDC | 0 VDC |
| 1773430615 | 298 Count | 641 Count | 128 Count | 0 VDC | 0 VDC |
| 1773429714 | 296 Count | 630 Count | 127 Count | 0 VDC | 0 VDC |
| 1773428814 | 290 Count | 608 Count | 126 Count | 0 VDC | 0 VDC |
| 1773427913 | 288 Count | 602 Count | 125 Count | 0 VDC | 0 VDC |
| 1773427012 | 287 Count | 597 Count | 125 Count | 0 VDC | 0 VDC |
| 1773426111 | 278 Count | 585 Count | 124 Count | 0 VDC | 0 VDC |
| 1773425210 | 258 Count | 570 Count | 123 Count | 0 VDC | 0 VDC |
| 1773424309 | 251 Count | 562 Count | 122 Count | 0 VDC | 0 VDC |
| 1773423408 | 246 Count | 553 Count | 121 Count | 0 VDC | 0 VDC |
| 1773422530 | 236 Count | 540 Count | 120 Count | 0 VDC | 0 VDC |
| 1773421629 | 226 Count | 523 Count | 119 Count | 0 VDC | 0 VDC |
| 1773420731 | 215 Count | 511 Count | 118 Count | 0 VDC | 0 VDC |
| 1773419827 | 199 Count | 494 Count | 117 Count | 0 VDC | 0 VDC |
| 1773418926 | 195 Count | 486 Count | 116 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)