This is the latest recevied telemetry packets stored in our database for station/object IU2NYE-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769344789 | 4.19 | 0 | 0 | 0 | 0 |
| 1769344028 | 4.19 | 0 | 0 | 0 | 0 |
| 1769343158 | 4.19 | 0 | 0 | 0 | 0 |
| 1769341591 | 4.14 | 0 | 0 | 0 | 0 |
| 1769340123 | 4.04 | 0 | 0 | 0 | 0 |
| 1769338889 | 3.95 | 0 | 0 | 0 | 0 |
| 1769327982 | 3.41 | 0 | 0 | 0 | 0 |
| 1769325710 | 3.44 | 0 | 0 | 0 | 0 |
| 1769320609 | 3.49 | 0 | 0 | 0 | 0 |
| 1769318300 | 3.51 | 0 | 0 | 0 | 0 |
| 1769316473 | 3.52 | 0 | 0 | 0 | 0 |
| 1769313187 | 3.54 | 0 | 0 | 0 | 0 |
| 1769310024 | 3.57 | 0 | 0 | 0 | 0 |
| 1769308833 | 3.58 | 0 | 0 | 0 | 0 |
| 1769306846 | 3.6 | 0 | 0 | 0 | 0 |
| 1769305662 | 3.61 | 0 | 0 | 0 | 0 |
| 1769301919 | 3.65 | 0 | 0 | 0 | 0 |
| 1769296634 | 3.69 | 0 | 0 | 0 | 0 |
| 1769294374 | 3.71 | 0 | 0 | 0 | 0 |
| 1769290978 | 3.74 | 0 | 0 | 0 | 0 |
| 1769286979 | 3.77 | 0 | 0 | 0 | 0 |
| 1769285185 | 3.78 | 0 | 0 | 0 | 0 |
| 1769282426 | 3.8 | 0 | 0 | 0 | 0 |
| 1769281096 | 3.81 | 0 | 0 | 0 | 0 |
| 1769280265 | 3.81 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)