This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1768824600 | 3.52 V | 0.52 V | 246 mW | 26.4 degC | 99837.5 Pa |
| 1768824240 | 3.59 V | 0.52 V | 236 mW | 26.4 degC | 99825 Pa |
| 1768823830 | 3.53 V | 0.47 V | 428 mW | 27.7 degC | 99837.5 Pa |
| 1768823532 | 3.52 V | 0.52 V | 250 mW | 26.3 degC | 99837.5 Pa |
| 1768823139 | 3.53 V | 0.53 V | 238 mW | 26.2 degC | 99850 Pa |
| 1768822779 | 3.55 V | 0.53 V | 244 mW | 26.1 degC | 99850 Pa |
| 1768822422 | 3.53 V | 0.53 V | 236 mW | 25.9 degC | 99837.5 Pa |
| 1768822054 | 3.53 V | 0.53 V | 244 mW | 26.1 degC | 99850 Pa |
| 1768821798 | 3.53 V | 0.53 V | 282 mW | 26.5 degC | 99862.5 Pa |
| 1768821335 | 3.52 V | 0.53 V | 250 mW | 26.1 degC | 99862.5 Pa |
| 1768821013 | 3.61 V | 0.53 V | 252 mW | 26.2 degC | 99862.5 Pa |
| 1768820612 | 3.53 V | 0.53 V | 240 mW | 26.1 degC | 99862.5 Pa |
| 1768820258 | 3.53 V | 0.53 V | 246 mW | 26 degC | 99850 Pa |
| 1768819897 | 3.62 V | 0.53 V | 250 mW | 26 degC | 99850 Pa |
| 1768819541 | 3.53 V | 0.53 V | 238 mW | 26.1 degC | 99862.5 Pa |
| 1768819227 | 3.63 V | 0.53 V | 256 mW | 26.3 degC | 99850 Pa |
| 1768818837 | 3.56 V | 0.53 V | 230 mW | 26 degC | 99850 Pa |
| 1768818457 | 3.64 V | 0.53 V | 228 mW | 25.8 degC | 99850 Pa |
| 1768818119 | 3.63 V | 0.53 V | 226 mW | 25.8 degC | 99837.5 Pa |
| 1768817733 | 3.64 V | 0.53 V | 226 mW | 25.8 degC | 99825 Pa |
| 1768817375 | 3.63 V | 0.53 V | 224 mW | 25.9 degC | 99837.5 Pa |
| 1768817016 | 3.59 V | 0.53 V | 214 mW | 26 degC | 99825 Pa |
| 1768816628 | 3.65 V | 0.53 V | 420 mW | 27.4 degC | 99837.5 Pa |
| 1768816285 | 3.65 V | 0.53 V | 218 mW | 25.8 degC | 99837.5 Pa |
| 1768815935 | 3.64 V | 0.54 V | 230 mW | 25.9 degC | 99837.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)