This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1770091791 | 3.98 V | 0 V | 100 mW | 28.7 degC | 100775 Pa |
| 1770091431 | 3.97 V | 0 V | 112 mW | 29.4 degC | 100787.5 Pa |
| 1770091079 | 3.98 V | 0 V | 112 mW | 29 degC | 100787.5 Pa |
| 1770090742 | 3.98 V | 0 V | 104 mW | 29.1 degC | 100800 Pa |
| 1770090344 | 3.98 V | 0 V | 108 mW | 28.8 degC | 100812.5 Pa |
| 1770090009 | 3.98 V | 0 V | 110 mW | 29.9 degC | 100825 Pa |
| 1770089626 | 3.98 V | 0 V | 110 mW | 28.9 degC | 100825 Pa |
| 1770089270 | 3.98 V | 0 V | 102 mW | 29 degC | 100812.5 Pa |
| 1770088910 | 3.98 V | 0 V | 112 mW | 29.2 degC | 100812.5 Pa |
| 1770088550 | 3.98 V | 0 V | 104 mW | 29 degC | 100825 Pa |
| 1770088189 | 3.98 V | 0 V | 112 mW | 29.1 degC | 100837.5 Pa |
| 1770087831 | 3.99 V | 0 V | 104 mW | 28.8 degC | 100837.5 Pa |
| 1770087490 | 3.98 V | 0 V | 120 mW | 30.1 degC | 100850 Pa |
| 1770087103 | 3.98 V | 0 V | 106 mW | 28.1 degC | 100850 Pa |
| 1770086788 | 3.98 V | 0 V | 102 mW | 29.4 degC | 100850 Pa |
| 1770086388 | 3.98 V | 0 V | 112 mW | 29 degC | 100862.5 Pa |
| 1770086028 | 3.99 V | 0 V | 102 mW | 28.9 degC | 100862.5 Pa |
| 1770085668 | 3.98 V | 0 V | 114 mW | 29 degC | 100862.5 Pa |
| 1770085300 | 3.98 V | 0 V | 100 mW | 28.3 degC | 100875 Pa |
| 1770084945 | 3.99 V | 0 V | 110 mW | 28.8 degC | 100875 Pa |
| 1770084613 | 3.98 V | 0 V | 112 mW | 29.8 degC | 100875 Pa |
| 1770084231 | 3.98 V | 0 V | 114 mW | 29.3 degC | 100900 Pa |
| 1770083878 | 3.98 V | 0 V | 108 mW | 29.1 degC | 100900 Pa |
| 1770083508 | 3.98 V | 0 V | 110 mW | 29 degC | 100900 Pa |
| 1770083147 | 3.98 V | 0 V | 108 mW | 28.3 degC | 100900 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)