This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RPM* | VBAT* | TEMP* | TRIP* | Value5* |
|---|---|---|---|---|---|
| 1773335268 | 915 rpm | 14.89 V | 63 degC | 0.5 km | 0 |
| 1773335208 | 770 rpm | 14.94 V | 63 degC | 0.5 km | 0 |
| 1773335148 | 770 rpm | 14.86 V | 63 degC | 0.5 km | 0 |
| 1773335088 | 769 rpm | 14.95 V | 63 degC | 0.5 km | 0 |
| 1773335028 | 771 rpm | 14.95 V | 63 degC | 0.5 km | 0 |
| 1773334968 | 769 rpm | 14.94 V | 63 degC | 0.5 km | 0 |
| 1773334908 | 767 rpm | 14.87 V | 63 degC | 0.5 km | 0 |
| 1773334848 | 765 rpm | 14.87 V | 64 degC | 0.5 km | 0 |
| 1773334788 | 766 rpm | 14.94 V | 64 degC | 0.5 km | 0 |
| 1773334728 | 767 rpm | 14.87 V | 64 degC | 0.5 km | 0 |
| 1773334668 | 767 rpm | 14.88 V | 64 degC | 0.5 km | 0 |
| 1773334608 | 767 rpm | 14.88 V | 65 degC | 0.5 km | 0 |
| 1773334548 | 768 rpm | 14.94 V | 65 degC | 0.5 km | 0 |
| 1773334488 | 766 rpm | 14.94 V | 64 degC | 0.5 km | 0 |
| 1773334428 | 1274 rpm | 15.04 V | 63 degC | 0.5 km | 0 |
| 1773334368 | 1433 rpm | 15.07 V | 63 degC | 0.4 km | 0 |
| 1773334308 | 1429 rpm | 15.07 V | 63 degC | 0.3 km | 0 |
| 1773334247 | 1433 rpm | 15.07 V | 63 degC | 0.3 km | 0 |
| 1773334187 | 1397 rpm | 15.07 V | 63 degC | 0.2 km | 0 |
| 1773334127 | 1396 rpm | 15.04 V | 63 degC | 0.2 km | 0 |
| 1773334067 | 1467 rpm | 15.04 V | 63 degC | 0.1 km | 0 |
| 1773334006 | 1284 rpm | 15.02 V | 64 degC | 0 km | 0 |
| 1773333946 | 751 rpm | 14.89 V | 64 degC | 0 km | 0 |
| 1773333886 | 1191 rpm | 14.95 V | 64 degC | 0 km | 0 |
| 1773333826 | 694 rpm | 14.87 V | 64 degC | 0 km | 0 |
*Used Equation Coefficients:
RPM: 0, 1, 0
VBAT: 0, 0.01, 0
TEMP: 0, 1, -100
TRIP: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)