This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770079502 | 3.68 | -4.8 | 1024.5 | 0 | 0 |
| 1770078599 | 3.69 | -4.7 | 1022.25 | 0 | 0 |
| 1770077696 | 3.69 | -4.6 | 1023.13 | 0 | 0 |
| 1770076793 | 3.7 | -4.5 | 1022.63 | 0 | 0 |
| 1770075890 | 3.7 | -4.4 | 1024.13 | 0 | 0 |
| 1770074987 | 3.71 | -4.3 | 1023.63 | 0 | 0 |
| 1770074084 | 3.72 | -4.2 | 1022.63 | 0 | 0 |
| 1770073181 | 3.73 | -4.2 | 1022.88 | 0 | 0 |
| 1770072278 | 3.73 | -4.2 | 1022.88 | 0 | 0 |
| 1770071375 | 3.74 | -4.1 | 1022 | 0 | 0 |
| 1770070472 | 3.75 | -4 | 1023.63 | 0 | 0 |
| 1770069569 | 3.75 | -3.9 | 1021.38 | 0 | 0 |
| 1770068666 | 3.76 | -3.8 | 1022.13 | 0 | 0 |
| 1770067762 | 3.77 | -3.7 | 1022.63 | 0 | 0 |
| 1770066860 | 3.77 | -3.5 | 1022.25 | 0 | 0 |
| 1770065957 | 3.78 | -3.3 | 1022.38 | 0 | 0 |
| 1770065054 | 3.78 | -3.2 | 1021.5 | 0 | 0 |
| 1770064151 | 3.79 | -3 | 1021.38 | 0 | 0 |
| 1770063248 | 3.8 | -2.8 | 1021.38 | 0 | 0 |
| 1770062345 | 3.8 | -2.7 | 1021.13 | 0 | 0 |
| 1770061442 | 3.81 | -2.4 | 1021.75 | 0 | 0 |
| 1770060539 | 3.81 | -2.1 | 1021.5 | 0 | 0 |
| 1770059636 | 3.82 | -1.9 | 1020.88 | 0 | 0 |
| 1770058733 | 3.83 | -1.7 | 1021.38 | 0 | 0 |
| 1770057830 | 3.83 | -1.4 | 1019.38 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)