This is the latest recevied telemetry packets stored in our database for station/object SQ8PDY-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788973013 | 226 Count | 668 Count | 0 Count | 0 VDC | 0 VDC |
| 1788971213 | 223 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1788969413 | 220 Count | 664 Count | 0 Count | 0 VDC | 0 VDC |
| 1788967612 | 217 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1788965812 | 214 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1788964012 | 211 Count | 658 Count | 0 Count | 0 VDC | 0 VDC |
| 1788962212 | 208 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1788960412 | 205 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1788958612 | 202 Count | 314 Count | 0 Count | 0 VDC | 0 VDC |
| 1788956812 | 199 Count | 314 Count | 0 Count | 0 VDC | 0 VDC |
| 1788955012 | 196 Count | 314 Count | 0 Count | 0 VDC | 0 VDC |
| 1788953212 | 194 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1788951408 | 191 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1788949608 | 188 Count | 245 Count | 0 Count | 0 VDC | 0 VDC |
| 1788947808 | 186 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1788946008 | 183 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1788944208 | 180 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1788942408 | 177 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788940608 | 174 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788938808 | 172 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788937008 | 169 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788935207 | 166 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788933407 | 163 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788931607 | 161 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
| 1788929807 | 158 Count | 226 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)