This is the latest recevied telemetry packets stored in our database for station/object EA7DW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785321025 | 983 Count | 843 Count | 425 Count | 4.26 VDC | 0.14 VDC |
| 1785320415 | 980 Count | 838 Count | 424 Count | 4.19 VDC | 0.14 VDC |
| 1785319808 | 976 Count | 832 Count | 422 Count | 4.15 VDC | 0.14 VDC |
| 1785319201 | 959 Count | 822 Count | 416 Count | 4.16 VDC | 0.14 VDC |
| 1785318594 | 944 Count | 813 Count | 412 Count | 4.15 VDC | 0.14 VDC |
| 1785317987 | 940 Count | 808 Count | 410 Count | 4.16 VDC | 0.14 VDC |
| 1785317380 | 936 Count | 803 Count | 408 Count | 4.16 VDC | 0.14 VDC |
| 1785316774 | 934 Count | 801 Count | 408 Count | 4.22 VDC | 0.14 VDC |
| 1785316167 | 930 Count | 796 Count | 406 Count | 4.18 VDC | 0.14 VDC |
| 1785315560 | 925 Count | 791 Count | 403 Count | 4.14 VDC | 0.14 VDC |
| 1785314953 | 923 Count | 789 Count | 403 Count | 4.16 VDC | 0.14 VDC |
| 1785314346 | 918 Count | 784 Count | 400 Count | 4.23 VDC | 0.14 VDC |
| 1785313739 | 913 Count | 778 Count | 397 Count | 4.2 VDC | 0.14 VDC |
| 1785313123 | 896 Count | 769 Count | 393 Count | 4.17 VDC | 0.14 VDC |
| 1785312515 | 884 Count | 761 Count | 390 Count | 4.19 VDC | 0.14 VDC |
| 1785311909 | 879 Count | 754 Count | 387 Count | 4.21 VDC | 0.14 VDC |
| 1785311302 | 877 Count | 751 Count | 387 Count | 4.21 VDC | 0.14 VDC |
| 1785310695 | 874 Count | 745 Count | 386 Count | 4.16 VDC | 0.14 VDC |
| 1785310088 | 869 Count | 741 Count | 383 Count | 4.21 VDC | 0.14 VDC |
| 1785309481 | 855 Count | 736 Count | 380 Count | 4.21 VDC | 0.14 VDC |
| 1785308874 | 831 Count | 729 Count | 376 Count | 4.17 VDC | 0.14 VDC |
| 1785308268 | 825 Count | 723 Count | 372 Count | 4.24 VDC | 0.14 VDC |
| 1785307661 | 820 Count | 717 Count | 369 Count | 4.15 VDC | 0.14 VDC |
| 1785307054 | 817 Count | 711 Count | 368 Count | 4.17 VDC | 0.14 VDC |
| 1785306447 | 800 Count | 702 Count | 362 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)