This is the latest recevied telemetry packets stored in our database for station/object F5PIJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760087888 | 3.04 | 0 | 0 | 0 | 0 |
| 1760086985 | 3.13 | 0 | 0 | 0 | 0 |
| 1760086082 | 3.2 | 0 | 0 | 0 | 0 |
| 1760085179 | 3.25 | 0 | 0 | 0 | 0 |
| 1760084276 | 3.28 | 0 | 0 | 0 | 0 |
| 1760083373 | 3.3 | 0 | 0 | 0 | 0 |
| 1760082475 | 3.31 | 0 | 0 | 0 | 0 |
| 1760081567 | 3.32 | 0 | 0 | 0 | 0 |
| 1760080664 | 3.33 | 0 | 0 | 0 | 0 |
| 1760079761 | 3.34 | 0 | 0 | 0 | 0 |
| 1760078858 | 3.35 | 0 | 0 | 0 | 0 |
| 1760077955 | 3.37 | 0 | 0 | 0 | 0 |
| 1760077052 | 3.38 | 0 | 0 | 0 | 0 |
| 1760076149 | 3.39 | 0 | 0 | 0 | 0 |
| 1760075246 | 3.41 | 0 | 0 | 0 | 0 |
| 1760074343 | 3.42 | 0 | 0 | 0 | 0 |
| 1760073440 | 3.43 | 0 | 0 | 0 | 0 |
| 1760072537 | 3.44 | 0 | 0 | 0 | 0 |
| 1760071634 | 3.45 | 0 | 0 | 0 | 0 |
| 1760070731 | 3.46 | 0 | 0 | 0 | 0 |
| 1760069828 | 3.47 | 0 | 0 | 0 | 0 |
| 1760068925 | 3.48 | 0 | 0 | 0 | 0 |
| 1760068022 | 3.49 | 0 | 0 | 0 | 0 |
| 1760067119 | 3.5 | 0 | 0 | 0 | 0 |
| 1760066216 | 3.5 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)