This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1759980558 | 54 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1759979956 | 53 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1759979353 | 52 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1759978750 | 51 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1759978147 | 50 Count | 0 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1759977544 | 49 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1759976942 | 48 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1759976339 | 47 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1759975736 | 46 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1759975133 | 45 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1759974530 | 44 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1759973928 | 43 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1759973325 | 42 Count | 0 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1759972722 | 41 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1759972119 | 40 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1759971516 | 39 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1759970914 | 38 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1759970311 | 37 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1759969708 | 36 Count | 0 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1759969105 | 35 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1759968502 | 34 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1759967900 | 33 Count | 0 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1759967297 | 32 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1759966694 | 31 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1759966423 | 30 Count | 0 Count | 0 Count | 4.19 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)