This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764266937 | 4.21 VDC | 21.3 VDC | 0 | 0 | 0 |
| 1764266037 | 4.22 VDC | 21.5 VDC | 0 | 0 | 0 |
| 1764265137 | 4.22 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1764264237 | 4.19 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1764263337 | 4.14 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1764262437 | 4.12 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764261536 | 4.11 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764260636 | 4.1 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764259736 | 4.09 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764258836 | 4.06 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764257936 | 4.04 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764257035 | 4.03 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764256135 | 4.02 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764255235 | 4.01 VDC | 5.44 VDC | 0 | 0 | 0 |
| 1764254335 | 4 VDC | 5.42 VDC | 0 | 0 | 0 |
| 1764253435 | 4.01 VDC | 5.42 VDC | 0 | 0 | 0 |
| 1764252534 | 4.01 VDC | 4.74 VDC | 0 | 0 | 0 |
| 1764251634 | 4.01 VDC | 5.24 VDC | 0 | 0 | 0 |
| 1764250734 | 4.01 VDC | 2.7 VDC | 0 | 0 | 0 |
| 1764249834 | 4.02 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1764248934 | 4.01 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1764248033 | 4.02 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1764247133 | 4.02 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1764246233 | 4.02 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1764245333 | 4.02 VDC | 1.28 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)