K0FTT Automobiles

My position About ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1759976561	31.6 °C	47.6 %RH	991.6 hPa	4.21 V
1759972767	31.97 °C	48.5 %RH	991.5 hPa	4.16 V
1759971940	31.52 °C	50.6 %RH	991.5 hPa	4.2 V
1759970707	31.33 °C	50.9 %RH	991.5 hPa	4.16 V
1759970141	31.21 °C	51.5 %RH	991.4 hPa	4.21 V
1759969655	31.13 °C	51.6 %RH	991.4 hPa	4.21 V
1759968952	31.12 °C	52.2 %RH	991.5 hPa	4.21 V
1759968602	31.25 °C	52.8 %RH	991.3 hPa	4.21 V
1759967741	31.33 °C	53.1 %RH	991.3 hPa	4.21 V
1759967337	31.15 °C	53.7 %RH	991.1 hPa	4.2 V
1759966551	30.2 °C	55 %RH	991.1 hPa	4.13 V
1759965941	30.31 °C	54.8 %RH	990.9 hPa	4.14 V
1759965397	30.53 °C	54.2 %RH	990.6 hPa	4.16 V
1759964741	30.91 °C	53.5 %RH	990.6 hPa	4.21 V
1759964146	30.92 °C	53.4 %RH	990.5 hPa	4.21 V
1759963541	30.98 °C	53.3 %RH	990.5 hPa	4.21 V
1759962941	30.98 °C	53.2 %RH	990.6 hPa	4.21 V
1759962341	31.03 °C	53.1 %RH	990.5 hPa	4.21 V
1759961741	31.08 °C	53 %RH	990.7 hPa	4.21 V
1759961141	31.15 °C	52.8 %RH	990.6 hPa	4.21 V
1759960541	31.21 °C	52.7 %RH	990.6 hPa	4.21 V
1759959941	31.29 °C	52.5 %RH	990.7 hPa	4.21 V
1759959341	31.37 °C	52.4 %RH	990.9 hPa	4.21 V
1759958742	31.42 °C	52.3 %RH	990.8 hPa	4.2 V
1759958141	31.28 °C	52.6 %RH	990.7 hPa	4.2 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)