This is the latest recevied telemetry packets stored in our database for station/object EA7LME-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760073012 | 3.62 | 0 | 0 | 0 | 0 |
| 1760072888 | 3.62 | 0 | 0 | 0 | 0 |
| 1760072367 | 3.63 | 0 | 0 | 0 | 0 |
| 1760070561 | 3.63 | 0 | 0 | 0 | 0 |
| 1760069657 | 3.64 | 0 | 0 | 0 | 0 |
| 1760068754 | 3.65 | 0 | 0 | 0 | 0 |
| 1760067851 | 3.65 | 0 | 0 | 0 | 0 |
| 1760067728 | 3.65 | 0 | 0 | 0 | 0 |
| 1760067146 | 3.65 | 0 | 0 | 0 | 0 |
| 1760066638 | 3.66 | 0 | 0 | 0 | 0 |
| 1760065804 | 3.67 | 0 | 0 | 0 | 0 |
| 1760065565 | 3.67 | 0 | 0 | 0 | 0 |
| 1760064963 | 3.67 | 0 | 0 | 0 | 0 |
| 1760064641 | 3.68 | 0 | 0 | 0 | 0 |
| 1760064617 | 3.67 | 0 | 0 | 0 | 0 |
| 1760063832 | 3.68 | 0 | 0 | 0 | 0 |
| 1760063672 | 3.69 | 0 | 0 | 0 | 0 |
| 1760063649 | 3.69 | 0 | 0 | 0 | 0 |
| 1760062746 | 3.69 | 0 | 0 | 0 | 0 |
| 1760062514 | 3.7 | 0 | 0 | 0 | 0 |
| 1760062264 | 3.7 | 0 | 0 | 0 | 0 |
| 1760061362 | 3.71 | 0 | 0 | 0 | 0 |
| 1760060459 | 3.72 | 0 | 0 | 0 | 0 |
| 1760059555 | 3.74 | 0 | 0 | 0 | 0 |
| 1760056847 | 3.78 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)