This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783232659 | 430 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783230855 | 426 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783229051 | 418 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783227247 | 417 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783225444 | 416 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783223639 | 413 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783221836 | 412 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783220032 | 411 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783218229 | 410 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783214621 | 406 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783212818 | 405 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783211014 | 404 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783209211 | 401 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783207407 | 400 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783205604 | 399 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783203800 | 398 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783201997 | 395 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783200193 | 394 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783198390 | 393 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783192979 | 388 Count | 225 Count | 95 Count | 0 VDC | 0 VDC |
| 1783191175 | 387 Count | 221 Count | 95 Count | 0 VDC | 0 VDC |
| 1783189371 | 386 Count | 196 Count | 95 Count | 0 VDC | 0 VDC |
| 1783187568 | 383 Count | 189 Count | 95 Count | 0 VDC | 0 VDC |
| 1783183960 | 380 Count | 182 Count | 94 Count | 0 VDC | 0 VDC |
| 1783182157 | 379 Count | 182 Count | 94 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)