This is the latest recevied telemetry packets stored in our database for station/object SR2JP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792880920 | 73 Count | 278 Count | 0 Count | 0 VDC | 0 VDC |
| 1792879239 | 66 Count | 242 Count | 0 Count | 0 VDC | 0 VDC |
| 1792877558 | 57 Count | 212 Count | 0 Count | 0 VDC | 0 VDC |
| 1792875877 | 36 Count | 182 Count | 0 Count | 0 VDC | 0 VDC |
| 1792874197 | 24 Count | 149 Count | 0 Count | 0 VDC | 0 VDC |
| 1792872516 | 16 Count | 108 Count | 0 Count | 0 VDC | 0 VDC |
| 1792870835 | 11 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1792869154 | 5 Count | 38 Count | 0 Count | 0 VDC | 0 VDC |
| 1792867473 | 321 Count | 1028 Count | 61 Count | 0 VDC | 0 VDC |
| 1792865793 | 315 Count | 993 Count | 61 Count | 0 VDC | 0 VDC |
| 1792862681 | 280 Count | 915 Count | 61 Count | 0 VDC | 0 VDC |
| 1792861000 | 263 Count | 851 Count | 61 Count | 0 VDC | 0 VDC |
| 1792859320 | 256 Count | 803 Count | 61 Count | 0 VDC | 0 VDC |
| 1792857639 | 244 Count | 765 Count | 60 Count | 0 VDC | 0 VDC |
| 1792855958 | 222 Count | 706 Count | 53 Count | 0 VDC | 0 VDC |
| 1792854277 | 215 Count | 671 Count | 53 Count | 0 VDC | 0 VDC |
| 1792852596 | 199 Count | 632 Count | 50 Count | 0 VDC | 0 VDC |
| 1792850915 | 171 Count | 579 Count | 39 Count | 0 VDC | 0 VDC |
| 1792849234 | 124 Count | 525 Count | 18 Count | 0 VDC | 0 VDC |
| 1792847553 | 100 Count | 441 Count | 11 Count | 0 VDC | 0 VDC |
| 1792845872 | 94 Count | 383 Count | 10 Count | 0 VDC | 0 VDC |
| 1792844192 | 87 Count | 350 Count | 10 Count | 0 VDC | 0 VDC |
| 1792819479 | 147 Count | 736 Count | 0 Count | 0 VDC | 0 VDC |
| 1792817798 | 140 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
| 1792816117 | 133 Count | 670 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)