This is the latest recevied telemetry packets stored in our database for station/object E26AFR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | SattNum* | HDOP* | Value5* |
|---|---|---|---|---|---|
| 1758628360 | 310 ⁰C | 423 %RH | 21 | 9 | 0 |
| 1758628301 | 310 ⁰C | 410 %RH | 20 | 10 | 0 |
| 1758628136 | 3117 ⁰C | 4226 %RH | 21 | 90 | 0 |
| 1758628017 | 3120 ⁰C | 4177 %RH | 15 | 100 | 0 |
| 1758627987 | 312 ⁰C | 414 %RH | 16 | 10 | 0 |
| 1758627980 | 312 ⁰C | 415 %RH | 15 | 10 | 0 |
| 1758627973 | 312 ⁰C | 415 %RH | 15 | 10 | 0 |
| 1758627959 | 312 ⁰C | 415 %RH | 14 | 10 | 0 |
| 1758627940 | 313 ⁰C | 420 %RH | 13 | 11 | 0 |
| 1758627930 | 313 ⁰C | 421 %RH | 12 | 11 | 0 |
| 1758627918 | 313 ⁰C | 420 %RH | 11 | 30 | 0 |
| 1758627872 | 313 ⁰C | 419 %RH | 10 | 45 | 0 |
| 1758627857 | 313 ⁰C | 419 %RH | 8 | 48 | 0 |
| 1758626625 | 317 ⁰C | 432 %RH | 21 | 8 | 0 |
| 1758626586 | 317 ⁰C | 436 %RH | 21 | 8 | 0 |
| 1758626574 | 317 ⁰C | 431 %RH | 18 | 9 | 0 |
| 1758625608 | 3218 ⁰C | 4578 %RH | 20 | 70 | 0 |
| 1758623774 | 37 ⁰C | 49 %RH | 22 | 0 | 0 |
| 1758623650 | 38 ⁰C | 50 %RH | 23 | 0 | 0 |
| 1758623523 | 38 ⁰C | 51 %RH | 20 | 0 | 0 |
| 1758623397 | 38 ⁰C | 53 %RH | 18 | 0 | 0 |
| 1758623210 | 38 ⁰C | 53 %RH | 15 | 1 | 0 |
| 1758623176 | 37 ⁰C | 53 %RH | 15 | 0 | 0 |
| 1758623107 | 37 ⁰C | 53 %RH | 12 | 1 | 0 |
| 1758623063 | 37 ⁰C | 53 %RH | 11 | 1 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
SattNum: 0, 1, 0
HDOP: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)