This is the latest recevied telemetry packets stored in our database for station/object IZ0DZX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1762022117 | 4.14 VDC | 25.7 C | 59.94 % | 1021.88 hPa | 0 |
| 1762013089 | 4.14 VDC | 26.1 C | 59.51 % | 1020.25 hPa | 0 |
| 1762004061 | 4.14 VDC | 26.7 C | 58.14 % | 1021.75 hPa | 0 |
| 1761995032 | 4.14 VDC | 26.5 C | 54.29 % | 1021.5 hPa | 0 |
| 1761976977 | 4.14 VDC | 24.9 C | 55.63 % | 1021.75 hPa | 0 |
| 1761967947 | 4.14 VDC | 25 C | 56.06 % | 1020.5 hPa | 0 |
| 1761958918 | 4.14 VDC | 25.2 C | 55.8 % | 1020.25 hPa | 0 |
| 1761949888 | 4.15 VDC | 25.5 C | 55.3 % | 1021.38 hPa | 0 |
| 1761940858 | 4.15 VDC | 25.7 C | 55.12 % | 1019 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)