This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1760001613 | 3.79 VDC | 19.9 C | 54.61 % | 0 hPa | 0 |
| 1760001315 | 3.8 VDC | 20 C | 54.15 % | 1031.13 hPa | 0 |
| 1760001275 | 3.8 VDC | 20 C | 54.15 % | 0 hPa | 0 |
| 1760001218 | 3.8 VDC | 20 C | 54.35 % | 1034.88 hPa | 0 |
| 1760001203 | 3.8 VDC | 20 C | 54.35 % | 1034.5 hPa | 0 |
| 1760001188 | 3.8 VDC | 20 C | 54.35 % | 1032.75 hPa | 0 |
| 1760000904 | 3.8 VDC | 20.1 C | 53.72 % | 1032.63 hPa | 0 |
| 1760000858 | 3.8 VDC | 20.2 C | 53.46 % | 1032.25 hPa | 0 |
| 1760000843 | 3.81 VDC | 20.2 C | 53.46 % | 1031.75 hPa | 0 |
| 1760000694 | 3.81 VDC | 20.4 C | 52.98 % | 1032.25 hPa | 0 |
| 1760000624 | 3.81 VDC | 20.6 C | 52.58 % | 1032.88 hPa | 0 |
| 1760000435 | 3.81 VDC | 21.1 C | 52.26 % | 1030.13 hPa | 0 |
| 1760000411 | 3.81 VDC | 21.1 C | 52.26 % | 1030.25 hPa | 0 |
| 1760000276 | 3.81 VDC | 21.4 C | 52.89 % | 1029 hPa | 0 |
| 1760000213 | 3.81 VDC | 21.6 C | 53.34 % | 1028.38 hPa | 0 |
| 1760000135 | 3.81 VDC | 21.8 C | 53.26 % | 1026.88 hPa | 0 |
| 1760000120 | 3.81 VDC | 21.8 C | 53.26 % | 1026.88 hPa | 0 |
| 1760000105 | 3.81 VDC | 21.8 C | 53.26 % | 1027.75 hPa | 0 |
| 1760000090 | 3.81 VDC | 21.8 C | 53.26 % | 1028.63 hPa | 0 |
| 1760000075 | 3.81 VDC | 21.8 C | 53.26 % | 1028.25 hPa | 0 |
| 1760000060 | 3.81 VDC | 22 C | 53.07 % | 1029.25 hPa | 0 |
| 1760000045 | 3.81 VDC | 22 C | 53.07 % | 1029.63 hPa | 0 |
| 1760000019 | 3.81 VDC | 22 C | 53.07 % | 1028.88 hPa | 0 |
| 1759999980 | 3.81 VDC | 22.1 C | 53.12 % | 1026.88 hPa | 0 |
| 1759999950 | 3.81 VDC | 22.2 C | 53.21 % | 1029.25 hPa | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 0.1, -50
Value3: 0, 0.01, 0
Value4: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)