This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758037868 | 6 Count | 48 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1758036065 | 5 Count | 42 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1758034263 | 4 Count | 35 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1758032460 | 3 Count | 28 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758030657 | 2 Count | 21 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1758028854 | 1 Count | 14 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1758027051 | 0 Count | 7 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1758025248 | 152 Count | 1006 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758023446 | 151 Count | 999 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1758021643 | 150 Count | 986 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758019840 | 149 Count | 979 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1758018037 | 148 Count | 972 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1758016268 | 143 Count | 963 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758014465 | 142 Count | 956 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1758012662 | 141 Count | 949 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1758010859 | 140 Count | 942 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758009056 | 139 Count | 935 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1758007253 | 138 Count | 928 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1758005451 | 137 Count | 921 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1758003648 | 136 Count | 914 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1758001845 | 135 Count | 907 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1758000042 | 134 Count | 894 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757998239 | 133 Count | 888 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1757996436 | 132 Count | 881 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1757994666 | 127 Count | 872 Count | 0 Count | 4.25 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)