This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768833883 | 0 | 451 | 0 | 432 | 0 |
| 1768832983 | 0 | 438 | 0 | 429 | 0 |
| 1768832083 | 0 | 428 | 0 | 429 | 0 |
| 1768831183 | 0 | 416 | 0 | 426 | 0 |
| 1768830283 | 0 | 409 | 0 | 428 | 0 |
| 1768829383 | 0 | 400 | 0 | 428 | 0 |
| 1768828483 | 0 | 394 | 0 | 427 | 0 |
| 1768827582 | 0 | 384 | 0 | 429 | 0 |
| 1768826683 | 0 | 378 | 0 | 424 | 0 |
| 1768825782 | 0 | 368 | 0 | 430 | 0 |
| 1768824882 | 0 | 358 | 0 | 430 | 0 |
| 1768823082 | 0 | 338 | 0 | 430 | 0 |
| 1768822182 | 0 | 327 | 0 | 425 | 0 |
| 1768821282 | 0 | 311 | 0 | 430 | 0 |
| 1768820382 | 0 | 298 | 0 | 425 | 0 |
| 1768819482 | 0 | 294 | 0 | 427 | 0 |
| 1768818582 | 0 | 277 | 0 | 425 | 0 |
| 1768817682 | 0 | 263 | 0 | 430 | 0 |
| 1768816782 | 0 | 238 | 0 | 428 | 0 |
| 1768815881 | 0 | 227 | 0 | 427 | 0 |
| 1768814981 | 0 | 214 | 0 | 429 | 0 |
| 1768814081 | 0 | 206 | 0 | 430 | 0 |
| 1768813181 | 0 | 192 | 0 | 428 | 0 |
| 1768812281 | 0 | 185 | 0 | 431 | 0 |
| 1768811381 | 0 | 180 | 0 | 428 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)