This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757483432 | 31 Count | 310 Count | 16 Count | 4.26 VDC | 0 VDC |
| 1757482831 | 29 Count | 286 Count | 15 Count | 4.3 VDC | 0 VDC |
| 1757482230 | 27 Count | 268 Count | 14 Count | 4.3 VDC | 0 VDC |
| 1757481629 | 25 Count | 251 Count | 13 Count | 4.31 VDC | 0 VDC |
| 1757481029 | 23 Count | 232 Count | 12 Count | 4.26 VDC | 0 VDC |
| 1757480428 | 21 Count | 214 Count | 11 Count | 4.34 VDC | 0 VDC |
| 1757479827 | 19 Count | 196 Count | 10 Count | 4.29 VDC | 0 VDC |
| 1757479227 | 17 Count | 178 Count | 9 Count | 4.32 VDC | 0 VDC |
| 1757478626 | 15 Count | 152 Count | 8 Count | 4.25 VDC | 0 VDC |
| 1757478026 | 13 Count | 128 Count | 7 Count | 4.28 VDC | 0 VDC |
| 1757477425 | 11 Count | 111 Count | 6 Count | 4.33 VDC | 0 VDC |
| 1757476824 | 9 Count | 94 Count | 5 Count | 4.25 VDC | 0 VDC |
| 1757476224 | 7 Count | 71 Count | 4 Count | 4.24 VDC | 0 VDC |
| 1757475625 | 5 Count | 60 Count | 3 Count | 4.26 VDC | 0 VDC |
| 1757475024 | 3 Count | 48 Count | 2 Count | 4.34 VDC | 0 VDC |
| 1757474423 | 1 Count | 28 Count | 1 Count | 4.26 VDC | 0 VDC |
| 1757473220 | 147 Count | 992 Count | 69 Count | 4.27 VDC | 0 VDC |
| 1757472619 | 145 Count | 972 Count | 68 Count | 4.33 VDC | 0 VDC |
| 1757472019 | 143 Count | 945 Count | 67 Count | 4.31 VDC | 0 VDC |
| 1757471418 | 141 Count | 916 Count | 66 Count | 4.32 VDC | 0 VDC |
| 1757470818 | 139 Count | 903 Count | 65 Count | 4.27 VDC | 0 VDC |
| 1757470217 | 137 Count | 885 Count | 64 Count | 4.31 VDC | 0 VDC |
| 1757469616 | 135 Count | 872 Count | 63 Count | 4.28 VDC | 0 VDC |
| 1757469016 | 133 Count | 855 Count | 62 Count | 4.3 VDC | 0 VDC |
| 1757467839 | 125 Count | 823 Count | 60 Count | 4.33 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)