This is the latest recevied telemetry packets stored in our database for station/object UN9GIE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775928614 | 508 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1775928010 | 507 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1775927407 | 506 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1775926804 | 505 Count | 812 Count | 0 Count | 0 VDC | 0 VDC |
| 1775926200 | 504 Count | 811 Count | 0 Count | 0 VDC | 0 VDC |
| 1775925597 | 503 Count | 810 Count | 0 Count | 0 VDC | 0 VDC |
| 1775924993 | 502 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1775924389 | 501 Count | 808 Count | 0 Count | 0 VDC | 0 VDC |
| 1775923787 | 500 Count | 807 Count | 0 Count | 0 VDC | 0 VDC |
| 1775923182 | 499 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1775922578 | 498 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1775921974 | 497 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1775921371 | 496 Count | 800 Count | 0 Count | 0 VDC | 0 VDC |
| 1775920768 | 495 Count | 799 Count | 0 Count | 0 VDC | 0 VDC |
| 1775920164 | 494 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1775919561 | 493 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1775918957 | 492 Count | 790 Count | 0 Count | 0 VDC | 0 VDC |
| 1775918354 | 491 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1775917751 | 490 Count | 787 Count | 0 Count | 0 VDC | 0 VDC |
| 1775917147 | 489 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1775916544 | 488 Count | 781 Count | 0 Count | 0 VDC | 0 VDC |
| 1775915940 | 487 Count | 779 Count | 0 Count | 0 VDC | 0 VDC |
| 1775915336 | 486 Count | 778 Count | 0 Count | 0 VDC | 0 VDC |
| 1775914733 | 485 Count | 775 Count | 0 Count | 0 VDC | 0 VDC |
| 1775914130 | 484 Count | 771 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)