This is the latest recevied telemetry packets stored in our database for station/object SV1IW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1756540982 | 397 Count | 194 Count | 194 Count | 0.28 VDC | 0 VDC |
| 1756540079 | 395 Count | 193 Count | 193 Count | 0.28 VDC | 0 VDC |
| 1756539176 | 393 Count | 192 Count | 192 Count | 0.28 VDC | 0 VDC |
| 1756538272 | 391 Count | 191 Count | 191 Count | 0.28 VDC | 0 VDC |
| 1756537369 | 387 Count | 188 Count | 188 Count | 0.28 VDC | 0 VDC |
| 1756536787 | 386 Count | 188 Count | 188 Count | 0.28 VDC | 0 VDC |
| 1756535884 | 384 Count | 187 Count | 187 Count | 0.28 VDC | 0 VDC |
| 1756534980 | 382 Count | 186 Count | 186 Count | 0.28 VDC | 0 VDC |
| 1756534077 | 380 Count | 185 Count | 185 Count | 0.28 VDC | 0 VDC |
| 1756533174 | 378 Count | 184 Count | 184 Count | 0.28 VDC | 0 VDC |
| 1756532271 | 376 Count | 183 Count | 183 Count | 0.28 VDC | 0 VDC |
| 1756531368 | 374 Count | 182 Count | 182 Count | 0.28 VDC | 0 VDC |
| 1756530464 | 372 Count | 181 Count | 181 Count | 0.28 VDC | 0 VDC |
| 1756529561 | 370 Count | 180 Count | 180 Count | 0.28 VDC | 0 VDC |
| 1756528658 | 368 Count | 179 Count | 179 Count | 0.28 VDC | 0 VDC |
| 1756527755 | 366 Count | 178 Count | 178 Count | 0.28 VDC | 0 VDC |
| 1756526851 | 364 Count | 177 Count | 177 Count | 0.28 VDC | 0 VDC |
| 1756525948 | 362 Count | 176 Count | 176 Count | 0.28 VDC | 0 VDC |
| 1756525045 | 360 Count | 175 Count | 175 Count | 0.28 VDC | 0 VDC |
| 1756524142 | 357 Count | 173 Count | 173 Count | 0.28 VDC | 0 VDC |
| 1756523316 | 355 Count | 172 Count | 172 Count | 0.28 VDC | 0 VDC |
| 1756522412 | 353 Count | 171 Count | 171 Count | 0.28 VDC | 0 VDC |
| 1756521509 | 351 Count | 170 Count | 170 Count | 0.28 VDC | 0 VDC |
| 1756520606 | 349 Count | 169 Count | 169 Count | 0.28 VDC | 0 VDC |
| 1756519703 | 347 Count | 168 Count | 168 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)