This is the latest recevied telemetry packets stored in our database for station/object IT9CYW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769292612 | 23.6 C | 42.48 % | 1005.75 hPa | 0 | 0 |
| 1769291708 | 23.7 C | 42.11 % | 1006.25 hPa | 0 | 0 |
| 1769290804 | 23.7 C | 41.94 % | 1010.88 hPa | 0 | 0 |
| 1769289900 | 23.7 C | 41.96 % | 1006.88 hPa | 0 | 0 |
| 1769288996 | 23.7 C | 42.03 % | 1004.88 hPa | 0 | 0 |
| 1769288092 | 23.8 C | 42.07 % | 1009.38 hPa | 0 | 0 |
| 1769287188 | 23.8 C | 41.7 % | 1007.75 hPa | 0 | 0 |
| 1769286284 | 23.9 C | 41.29 % | 1012.38 hPa | 0 | 0 |
| 1769285531 | 24.2 C | 40.91 % | 998.75 hPa | 0 | 0 |
| 1769284928 | 25 C | 39.78 % | 1001.63 hPa | 0 | 0 |
| 1769284787 | 25 C | 39.87 % | 1002 hPa | 0 | 0 |
| 1769283883 | 23.9 C | 41.29 % | 1012.63 hPa | 0 | 0 |
| 1769282979 | 24 C | 41.19 % | 1009.25 hPa | 0 | 0 |
| 1769282075 | 24.4 C | 40.43 % | 1008.63 hPa | 0 | 0 |
| 1769281172 | 24 C | 40.54 % | 1007.88 hPa | 0 | 0 |
| 1769280268 | 24.2 C | 40.49 % | 1012.75 hPa | 0 | 0 |
| 1769279364 | 24.5 C | 39.92 % | 1009.38 hPa | 0 | 0 |
| 1769278460 | 25.7 C | 38.64 % | 1005.25 hPa | 0 | 0 |
| 1769277556 | 25.1 C | 39.24 % | 1004.88 hPa | 0 | 0 |
| 1769276652 | 26.9 C | 36.24 % | 1008.75 hPa | 0 | 0 |
| 1769275748 | 27.7 C | 35.25 % | 1006.63 hPa | 0 | 0 |
| 1769274844 | 28.3 C | 34.58 % | 1009.38 hPa | 0 | 0 |
| 1769273940 | 28.7 C | 34.74 % | 1003.25 hPa | 0 | 0 |
| 1769273036 | 28.3 C | 36.33 % | 1012.25 hPa | 0 | 0 |
| 1769272113 | 23.3 C | 44.22 % | 968 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)