This is the latest recevied telemetry packets stored in our database for station/object DF2OR-L4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761912278 | 0.8 VDC | 0 | 0 | 0 | 0 |
| 1761911378 | 0.82 VDC | 0 | 0 | 0 | 0 |
| 1761910477 | 0.82 VDC | 0 | 0 | 0 | 0 |
| 1761909577 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761908677 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761907777 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761906877 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761905977 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761905076 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761904176 | 0.78 VDC | 0 | 0 | 0 | 0 |
| 1761903276 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761902376 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761901476 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1761900576 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761899676 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761898776 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761897876 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761896975 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761896075 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761895175 | 0.72 VDC | 0 | 0 | 0 | 0 |
| 1761894275 | 0.74 VDC | 0 | 0 | 0 | 0 |
| 1761893375 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761892479 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761891575 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1761890675 | 0.84 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)