This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757370695 | 96 Count | 161 Count | 90 Count | 4.12 VDC | 0 VDC |
| 1757368891 | 83 Count | 140 Count | 78 Count | 4.13 VDC | 0 VDC |
| 1757367088 | 70 Count | 117 Count | 66 Count | 4.15 VDC | 0 VDC |
| 1757365285 | 55 Count | 89 Count | 52 Count | 4.18 VDC | 0 VDC |
| 1757363481 | 41 Count | 66 Count | 39 Count | 4.14 VDC | 0 VDC |
| 1757361678 | 26 Count | 42 Count | 25 Count | 4.11 VDC | 0 VDC |
| 1757359874 | 11 Count | 19 Count | 11 Count | 4.12 VDC | 0 VDC |
| 1757358071 | 607 Count | 1012 Count | 566 Count | 4.2 VDC | 0 VDC |
| 1757356268 | 594 Count | 989 Count | 554 Count | 4.13 VDC | 0 VDC |
| 1757354504 | 584 Count | 964 Count | 545 Count | 4.2 VDC | 0 VDC |
| 1757352701 | 570 Count | 942 Count | 532 Count | 4.17 VDC | 0 VDC |
| 1757350898 | 553 Count | 901 Count | 516 Count | 4.15 VDC | 0 VDC |
| 1757349094 | 538 Count | 867 Count | 502 Count | 4.19 VDC | 0 VDC |
| 1757347291 | 524 Count | 828 Count | 489 Count | 4.15 VDC | 0 VDC |
| 1757345488 | 501 Count | 787 Count | 467 Count | 4.16 VDC | 0 VDC |
| 1757343684 | 488 Count | 750 Count | 455 Count | 4.18 VDC | 0 VDC |
| 1757341884 | 471 Count | 706 Count | 439 Count | 4.14 VDC | 0 VDC |
| 1757340077 | 456 Count | 670 Count | 425 Count | 4.21 VDC | 0 VDC |
| 1757338274 | 437 Count | 633 Count | 407 Count | 4.2 VDC | 0 VDC |
| 1757336471 | 413 Count | 595 Count | 384 Count | 4.13 VDC | 0 VDC |
| 1757334667 | 393 Count | 566 Count | 365 Count | 4.2 VDC | 0 VDC |
| 1757333547 | 376 Count | 543 Count | 349 Count | 4.15 VDC | 0 VDC |
| 1757331744 | 353 Count | 514 Count | 327 Count | 4.17 VDC | 0 VDC |
| 1757329940 | 329 Count | 479 Count | 304 Count | 4.19 VDC | 0 VDC |
| 1757328137 | 303 Count | 446 Count | 279 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)