This is the latest recevied telemetry packets stored in our database for station/object SA0FRD-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755342973 | 23.8 C | 50.28 % | 1012.75 hPa | 0 | 0 |
| 1755342802 | 23.6 C | 49.99 % | 1013 hPa | 0 | 0 |
| 1755342547 | 22.9 C | 51.61 % | 1013.88 hPa | 0 | 0 |
| 1755342140 | 22.2 C | 50.29 % | 1012.5 hPa | 0 | 0 |
| 1755341853 | 21.9 C | 51.98 % | 1015.25 hPa | 0 | 0 |
| 1755341570 | 21.7 C | 52.92 % | 1013.63 hPa | 0 | 0 |
| 1755341167 | 21 C | 53.82 % | 1014 hPa | 0 | 0 |
| 1755340768 | 20.6 C | 56.79 % | 1013.88 hPa | 0 | 0 |
| 1755340430 | 20.9 C | 61.25 % | 1014.25 hPa | 0 | 0 |
| 1755324293 | 17.7 C | 63.38 % | 1015 hPa | 0 | 0 |
| 1755324002 | 17.7 C | 63.59 % | 1014.75 hPa | 0 | 0 |
| 1755323576 | 17.7 C | 63.64 % | 1014.75 hPa | 0 | 0 |
| 1755323389 | 17.7 C | 63.11 % | 1016.25 hPa | 0 | 0 |
| 1755323162 | 18 C | 62.08 % | 1013.5 hPa | 0 | 0 |
| 1755322967 | 18.1 C | 61.64 % | 1014.13 hPa | 0 | 0 |
| 1755322752 | 18.2 C | 60.69 % | 1015 hPa | 0 | 0 |
| 1755322574 | 18.7 C | 59.07 % | 1014.63 hPa | 0 | 0 |
| 1755318863 | 23.4 C | 58.32 % | 1015.63 hPa | 0 | 0 |
| 1755309837 | 23.9 C | 57.66 % | 1015.13 hPa | 0 | 0 |
| 1755291785 | 25.5 C | 56.39 % | 1013.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)