This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766000444 | 44 Count | 45 Count | 41 Count | 4.11 VDC | 0 VDC |
| 1765998643 | 32 Count | 33 Count | 30 Count | 4.1 VDC | 0 VDC |
| 1765996843 | 21 Count | 22 Count | 20 Count | 4.1 VDC | 0 VDC |
| 1765995041 | 10 Count | 11 Count | 10 Count | 4.1 VDC | 0 VDC |
| 1765993241 | 988 Count | 1006 Count | 893 Count | 4.1 VDC | 0 VDC |
| 1765991440 | 979 Count | 997 Count | 885 Count | 4.1 VDC | 0 VDC |
| 1765989639 | 972 Count | 990 Count | 879 Count | 4.1 VDC | 0 VDC |
| 1765987838 | 967 Count | 985 Count | 875 Count | 4.1 VDC | 0 VDC |
| 1765986038 | 959 Count | 977 Count | 868 Count | 4.1 VDC | 0 VDC |
| 1765984237 | 953 Count | 971 Count | 863 Count | 4.11 VDC | 0 VDC |
| 1765982436 | 946 Count | 964 Count | 857 Count | 4.1 VDC | 0 VDC |
| 1765980636 | 939 Count | 957 Count | 851 Count | 4.1 VDC | 0 VDC |
| 1765978835 | 932 Count | 950 Count | 845 Count | 4.1 VDC | 0 VDC |
| 1765977034 | 926 Count | 944 Count | 840 Count | 4.11 VDC | 0 VDC |
| 1765975233 | 920 Count | 938 Count | 835 Count | 4.1 VDC | 0 VDC |
| 1765973433 | 913 Count | 931 Count | 829 Count | 4.11 VDC | 0 VDC |
| 1765969831 | 900 Count | 918 Count | 818 Count | 4.1 VDC | 0 VDC |
| 1765968031 | 889 Count | 907 Count | 808 Count | 4.1 VDC | 0 VDC |
| 1765966230 | 875 Count | 893 Count | 795 Count | 4.1 VDC | 0 VDC |
| 1765964429 | 865 Count | 883 Count | 786 Count | 4.1 VDC | 0 VDC |
| 1765962629 | 852 Count | 870 Count | 774 Count | 4.1 VDC | 0 VDC |
| 1765960828 | 842 Count | 861 Count | 765 Count | 4.1 VDC | 0 VDC |
| 1765959027 | 830 Count | 849 Count | 754 Count | 4.11 VDC | 0 VDC |
| 1765957227 | 819 Count | 838 Count | 744 Count | 4.11 VDC | 0 VDC |
| 1765955426 | 807 Count | 826 Count | 733 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)