This is the latest recevied telemetry packets stored in our database for station/object KC5DJY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1755881009 | 80 | 3928 | 0 | 0 | 0 |
| 1755880826 | 80 | 3935 | 0 | 0 | 0 |
| 1755880734 | 80 | 3943 | 0 | 0 | 0 |
| 1755880642 | 80 | 3954 | 0 | 0 | 0 |
| 1755880551 | 81 | 3968 | 0 | 0 | 0 |
| 1755880459 | 81 | 3983 | 0 | 0 | 0 |
| 1755880368 | 81 | 3999 | 0 | 0 | 0 |
| 1755880277 | 81 | 4015 | 0 | 0 | 0 |
| 1755880185 | 81 | 4030 | 0 | 0 | 0 |
| 1755880094 | 81 | 4042 | 0 | 0 | 0 |
| 1755880002 | 81 | 4051 | 0 | 0 | 0 |
| 1755879911 | 81 | 4058 | 0 | 0 | 0 |
| 1755879820 | 81 | 4062 | 0 | 0 | 0 |
| 1755879728 | 81 | 4063 | 0 | 0 | 0 |
| 1755879637 | 81 | 4063 | 0 | 0 | 0 |
| 1755879545 | 81 | 4063 | 0 | 0 | 0 |
| 1755879454 | 82 | 4063 | 0 | 0 | 0 |
| 1755879362 | 82 | 4063 | 0 | 0 | 0 |
| 1755879271 | 82 | 4063 | 0 | 0 | 0 |
| 1755879180 | 82 | 4063 | 0 | 0 | 0 |
| 1755879088 | 82 | 4064 | 0 | 0 | 0 |
| 1755878997 | 82 | 4065 | 0 | 0 | 0 |
| 1755878909 | 82 | 4072 | 0 | 0 | 0 |
| 1755878905 | 82 | 4067 | 0 | 0 | 0 |
| 1755878847 | 82 | 4076 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)