This is the latest recevied telemetry packets stored in our database for station/object M0MXL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773458905 | 555 Count | 580 Count | 436 Count | 0 VDC | 0 VDC |
| 1773457101 | 550 Count | 574 Count | 432 Count | 0 VDC | 0 VDC |
| 1773455297 | 546 Count | 569 Count | 429 Count | 0 VDC | 0 VDC |
| 1773453493 | 541 Count | 563 Count | 425 Count | 0 VDC | 0 VDC |
| 1773451689 | 537 Count | 558 Count | 422 Count | 0 VDC | 0 VDC |
| 1773449885 | 532 Count | 552 Count | 418 Count | 0 VDC | 0 VDC |
| 1773448081 | 523 Count | 542 Count | 410 Count | 0 VDC | 0 VDC |
| 1773446277 | 518 Count | 536 Count | 406 Count | 0 VDC | 0 VDC |
| 1773444473 | 509 Count | 526 Count | 398 Count | 0 VDC | 0 VDC |
| 1773442716 | 504 Count | 520 Count | 394 Count | 0 VDC | 0 VDC |
| 1773440912 | 500 Count | 516 Count | 391 Count | 0 VDC | 0 VDC |
| 1773439108 | 495 Count | 511 Count | 387 Count | 0 VDC | 0 VDC |
| 1773437304 | 491 Count | 506 Count | 384 Count | 0 VDC | 0 VDC |
| 1773435500 | 486 Count | 500 Count | 380 Count | 0 VDC | 0 VDC |
| 1773433696 | 482 Count | 495 Count | 377 Count | 0 VDC | 0 VDC |
| 1773431892 | 477 Count | 489 Count | 373 Count | 0 VDC | 0 VDC |
| 1773430088 | 473 Count | 484 Count | 370 Count | 0 VDC | 0 VDC |
| 1773428284 | 468 Count | 478 Count | 366 Count | 0 VDC | 0 VDC |
| 1773426480 | 462 Count | 471 Count | 361 Count | 0 VDC | 0 VDC |
| 1773424676 | 457 Count | 466 Count | 357 Count | 0 VDC | 0 VDC |
| 1773422873 | 453 Count | 461 Count | 354 Count | 0 VDC | 0 VDC |
| 1773421116 | 448 Count | 455 Count | 350 Count | 0 VDC | 0 VDC |
| 1773419312 | 444 Count | 450 Count | 347 Count | 0 VDC | 0 VDC |
| 1773417508 | 439 Count | 445 Count | 343 Count | 0 VDC | 0 VDC |
| 1773415704 | 435 Count | 442 Count | 340 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)