This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765939992 | 21.51 C | 57.35 % | 1628 hPa | 0 | 0 |
| 1765939394 | 21.6 C | 57.31 % | 1628 hPa | 0 | 0 |
| 1765938792 | 21.64 C | 57.21 % | 1628 hPa | 0 | 0 |
| 1765938192 | 21.69 C | 57.16 % | 1628 hPa | 0 | 0 |
| 1765937593 | 21.75 C | 57.42 % | 1628 hPa | 0 | 0 |
| 1765936992 | 22.02 C | 57.12 % | 1628 hPa | 0 | 0 |
| 1765936981 | 22.02 C | 57.12 % | 1628 hPa | 0 | 0 |
| 1765936371 | 21.82 C | 56.98 % | 1628 hPa | 0 | 0 |
| 1765935771 | 21.87 C | 57 % | 1628 hPa | 0 | 0 |
| 1765935171 | 21.85 C | 57 % | 1628 hPa | 0 | 0 |
| 1765934571 | 21.93 C | 56.8 % | 1628 hPa | 0 | 0 |
| 1765933971 | 22.03 C | 56.74 % | 1628 hPa | 0 | 0 |
| 1765933371 | 22.17 C | 56.59 % | 1628 hPa | 0 | 0 |
| 1765932771 | 22.29 C | 56.6 % | 1628 hPa | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)