This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1764255560 | 27.05 °C | 71.2 %RH | 1015.3 hPa | 13.3 V | 27 |
| 1764249473 | 28.37 °C | 71.1 %RH | 1014.4 hPa | 13.3 V | 27 |
| 1764243389 | 30.19 °C | 71.8 %RH | 1012.7 hPa | 13.31 V | 27 |
| 1764237302 | 32.19 °C | 72.4 %RH | 1011.3 hPa | 13.31 V | 32 |
| 1764231218 | 31.68 °C | 77.8 %RH | 1011 hPa | 13.49 V | 30 |
| 1764219046 | 26.92 °C | 77.5 %RH | 1014 hPa | 13.76 V | 28 |
| 1764212962 | 25.1 °C | 76.5 %RH | 1015.4 hPa | 13.3 V | 30 |
| 1764206875 | 23.82 °C | 76.9 %RH | 1015.5 hPa | 13.29 V | 29 |
| 1764200791 | 23.35 °C | 77 %RH | 1014.2 hPa | 13.3 V | 27 |
| 1764194706 | 23.91 °C | 76.8 %RH | 1013 hPa | 13.25 V | 30 |
| 1764188619 | 24.45 °C | 76.9 %RH | 1012.7 hPa | 13.3 V | 29 |
| 1764182535 | 25.15 °C | 76.7 %RH | 1013.3 hPa | 13.25 V | 28 |
| 1764176450 | 26.04 °C | 76.5 %RH | 1014 hPa | 13.25 V | 25 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)