This is the latest recevied telemetry packets stored in our database for station/object OK4RS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1755004442 | 230 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1755002641 | 229 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1755000840 | 228 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754999040 | 227 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754997239 | 226 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754995438 | 225 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754993637 | 224 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754991837 | 223 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754990036 | 222 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754988235 | 221 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754986434 | 220 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754984642 | 219 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754982842 | 218 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754981041 | 217 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754979240 | 216 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754977439 | 215 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754975638 | 214 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754973838 | 213 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754972037 | 212 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754970236 | 211 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754968435 | 210 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754966634 | 209 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754964834 | 208 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754963041 | 207 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1754961240 | 206 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)