K0FTT Automobiles

My position About ☰

reset

VE7EOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Battery*	Temp*
1770063590	13.98 Volts	26.61 Deg.C
1770063550	13.95 Volts	26.12 Deg.C
1770063540	14.15 Volts	26.12 Deg.C
1770063513	13.92 Volts	25.63 Deg.C
1770063507	13.86 Volts	25.63 Deg.C
1770063310	14.06 Volts	25.14 Deg.C
1770063281	14.09 Volts	25.14 Deg.C
1770063228	14.15 Volts	25.14 Deg.C
1770063171	13.92 Volts	24.65 Deg.C
1770063165	13.89 Volts	24.65 Deg.C
1770063137	13.95 Volts	24.65 Deg.C
1770063103	14.06 Volts	24.16 Deg.C
1770063096	13.89 Volts	23.67 Deg.C
1770063090	13.95 Volts	24.16 Deg.C
1770063078	14.06 Volts	24.16 Deg.C
1770063054	13.74 Volts	23.67 Deg.C
1770063042	13.8 Volts	23.67 Deg.C
1770062977	13.92 Volts	23.18 Deg.C
1770062933	14.01 Volts	22.7 Deg.C
1770062916	14.15 Volts	22.21 Deg.C
1770062899	14.01 Volts	22.21 Deg.C
1770062895	14.12 Volts	22.21 Deg.C
1770062888	14.12 Volts	21.72 Deg.C
1770062837	14.03 Volts	21.23 Deg.C
1770062795	13.98 Volts	20.74 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)