This is the latest recevied telemetry packets stored in our database for station/object SQ3BKL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773434635 | 688 Count | 892 Count | 193 Count | 0 VDC | 0 VDC |
| 1773432834 | 681 Count | 882 Count | 190 Count | 0 VDC | 0 VDC |
| 1773431033 | 675 Count | 861 Count | 188 Count | 0 VDC | 0 VDC |
| 1773429232 | 668 Count | 841 Count | 186 Count | 0 VDC | 0 VDC |
| 1773427431 | 662 Count | 818 Count | 184 Count | 0 VDC | 0 VDC |
| 1773425630 | 654 Count | 797 Count | 182 Count | 0 VDC | 0 VDC |
| 1773423829 | 641 Count | 774 Count | 180 Count | 0 VDC | 0 VDC |
| 1773422028 | 635 Count | 748 Count | 178 Count | 0 VDC | 0 VDC |
| 1773420227 | 629 Count | 717 Count | 176 Count | 0 VDC | 0 VDC |
| 1773418426 | 623 Count | 701 Count | 174 Count | 0 VDC | 0 VDC |
| 1773416486 | 622 Count | 700 Count | 174 Count | 0 VDC | 0 VDC |
| 1773414708 | 616 Count | 689 Count | 172 Count | 0 VDC | 0 VDC |
| 1773412907 | 610 Count | 665 Count | 170 Count | 0 VDC | 0 VDC |
| 1773411107 | 603 Count | 632 Count | 167 Count | 0 VDC | 0 VDC |
| 1773409306 | 596 Count | 624 Count | 165 Count | 0 VDC | 0 VDC |
| 1773407505 | 590 Count | 615 Count | 163 Count | 0 VDC | 0 VDC |
| 1773405704 | 584 Count | 606 Count | 161 Count | 0 VDC | 0 VDC |
| 1773403903 | 575 Count | 597 Count | 159 Count | 0 VDC | 0 VDC |
| 1773402102 | 569 Count | 588 Count | 157 Count | 0 VDC | 0 VDC |
| 1773400301 | 563 Count | 580 Count | 155 Count | 0 VDC | 0 VDC |
| 1773398500 | 557 Count | 570 Count | 153 Count | 0 VDC | 0 VDC |
| 1773396699 | 551 Count | 561 Count | 151 Count | 0 VDC | 0 VDC |
| 1773394898 | 545 Count | 551 Count | 149 Count | 0 VDC | 0 VDC |
| 1773393097 | 539 Count | 542 Count | 147 Count | 0 VDC | 0 VDC |
| 1773391296 | 533 Count | 532 Count | 145 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)