This is the latest recevied telemetry packets stored in our database for station/object SP7UB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754526090 | 413 Count | 228 Count | 196 Count | 4.15 VDC | 0 VDC |
| 1754524289 | 410 Count | 225 Count | 194 Count | 4.15 VDC | 0 VDC |
| 1754522488 | 407 Count | 222 Count | 192 Count | 4.17 VDC | 0 VDC |
| 1754520688 | 403 Count | 218 Count | 189 Count | 4.16 VDC | 0 VDC |
| 1754518887 | 399 Count | 214 Count | 186 Count | 4.17 VDC | 0 VDC |
| 1754517086 | 396 Count | 211 Count | 184 Count | 4.14 VDC | 0 VDC |
| 1754515285 | 393 Count | 208 Count | 182 Count | 4.09 VDC | 0 VDC |
| 1754513485 | 390 Count | 205 Count | 180 Count | 4.02 VDC | 0 VDC |
| 1754511684 | 387 Count | 202 Count | 178 Count | 3.98 VDC | 0 VDC |
| 1754509883 | 380 Count | 197 Count | 173 Count | 3.93 VDC | 0 VDC |
| 1754508082 | 378 Count | 195 Count | 172 Count | 3.86 VDC | 0 VDC |
| 1754506282 | 375 Count | 189 Count | 170 Count | 3.8 VDC | 0 VDC |
| 1754505875 | 374 Count | 189 Count | 170 Count | 3.76 VDC | 0 VDC |
| 1754501924 | 373 Count | 189 Count | 170 Count | 3.94 VDC | 0 VDC |
| 1754500123 | 368 Count | 187 Count | 168 Count | 3.94 VDC | 0 VDC |
| 1754498322 | 363 Count | 185 Count | 166 Count | 3.96 VDC | 0 VDC |
| 1754496522 | 358 Count | 183 Count | 164 Count | 3.97 VDC | 0 VDC |
| 1754496357 | 357 Count | 183 Count | 164 Count | 3.96 VDC | 0 VDC |
| 1754494685 | 352 Count | 181 Count | 162 Count | 3.97 VDC | 0 VDC |
| 1754493056 | 348 Count | 179 Count | 161 Count | 3.97 VDC | 0 VDC |
| 1754491255 | 343 Count | 177 Count | 159 Count | 3.98 VDC | 0 VDC |
| 1754489465 | 338 Count | 173 Count | 157 Count | 3.99 VDC | 0 VDC |
| 1754487664 | 333 Count | 171 Count | 155 Count | 3.99 VDC | 0 VDC |
| 1754485863 | 328 Count | 168 Count | 153 Count | 3.99 VDC | 0 VDC |
| 1754484062 | 322 Count | 166 Count | 151 Count | 4.01 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)