This is the latest recevied telemetry packets stored in our database for station/object F4GCF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781421533 | 0 Count | 572 Count | 267 Count | 0 VDC | 0 VDC |
| 1781420933 | 0 Count | 562 Count | 261 Count | 0 VDC | 0 VDC |
| 1781420333 | 0 Count | 554 Count | 259 Count | 0 VDC | 0 VDC |
| 1781419733 | 0 Count | 542 Count | 254 Count | 0 VDC | 0 VDC |
| 1781419133 | 0 Count | 523 Count | 248 Count | 0 VDC | 0 VDC |
| 1781418532 | 0 Count | 508 Count | 243 Count | 0 VDC | 0 VDC |
| 1781417932 | 0 Count | 496 Count | 237 Count | 0 VDC | 0 VDC |
| 1781417332 | 0 Count | 484 Count | 232 Count | 0 VDC | 0 VDC |
| 1781416732 | 0 Count | 472 Count | 228 Count | 0 VDC | 0 VDC |
| 1781416132 | 0 Count | 457 Count | 222 Count | 0 VDC | 0 VDC |
| 1781415532 | 0 Count | 444 Count | 215 Count | 0 VDC | 0 VDC |
| 1781414931 | 0 Count | 429 Count | 209 Count | 0 VDC | 0 VDC |
| 1781414348 | 0 Count | 420 Count | 205 Count | 0 VDC | 0 VDC |
| 1781413746 | 0 Count | 401 Count | 197 Count | 0 VDC | 0 VDC |
| 1781413146 | 0 Count | 383 Count | 192 Count | 0 VDC | 0 VDC |
| 1781412546 | 0 Count | 373 Count | 186 Count | 0 VDC | 0 VDC |
| 1781411946 | 0 Count | 366 Count | 182 Count | 0 VDC | 0 VDC |
| 1781411346 | 0 Count | 357 Count | 178 Count | 0 VDC | 0 VDC |
| 1781410746 | 0 Count | 340 Count | 169 Count | 0 VDC | 0 VDC |
| 1781410146 | 0 Count | 320 Count | 160 Count | 0 VDC | 0 VDC |
| 1781409546 | 0 Count | 305 Count | 155 Count | 0 VDC | 0 VDC |
| 1781408946 | 0 Count | 287 Count | 146 Count | 0 VDC | 0 VDC |
| 1781408346 | 0 Count | 266 Count | 133 Count | 0 VDC | 0 VDC |
| 1781407745 | 0 Count | 252 Count | 125 Count | 0 VDC | 0 VDC |
| 1781407145 | 0 Count | 234 Count | 115 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)