This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754250921 | 11 Pkt/10m | 9 Pkt/10m | 4 Volt | 0 | 0 |
| 1754249716 | 46 Pkt/10m | 45 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754248512 | 58 Pkt/10m | 55 Pkt/10m | 4 Volt | 0 | 0 |
| 1754247308 | 24 Pkt/10m | 21 Pkt/10m | 4 Volt | 0 | 0 |
| 1754246105 | 22 Pkt/10m | 19 Pkt/10m | 4 Volt | 0 | 0 |
| 1754244901 | 22 Pkt/10m | 17 Pkt/10m | 4 Volt | 0 | 0 |
| 1754243697 | 17 Pkt/10m | 12 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754242493 | 55 Pkt/10m | 53 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754241289 | 21 Pkt/10m | 19 Pkt/10m | 4 Volt | 0 | 0 |
| 1754240086 | 21 Pkt/10m | 17 Pkt/10m | 4 Volt | 0 | 0 |
| 1754238882 | 26 Pkt/10m | 23 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754237678 | 22 Pkt/10m | 17 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754236475 | 21 Pkt/10m | 16 Pkt/10m | 4 Volt | 0 | 0 |
| 1754235271 | 36 Pkt/10m | 35 Pkt/10m | 4 Volt | 0 | 0 |
| 1754234067 | 30 Pkt/10m | 29 Pkt/10m | 4 Volt | 0 | 0 |
| 1754232863 | 22 Pkt/10m | 16 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754231659 | 22 Pkt/10m | 19 Pkt/10m | 4 Volt | 0 | 0 |
| 1754230455 | 23 Pkt/10m | 23 Pkt/10m | 4 Volt | 0 | 0 |
| 1754229252 | 16 Pkt/10m | 14 Pkt/10m | 4.02 Volt | 0 | 0 |
| 1754228049 | 27 Pkt/10m | 21 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754226844 | 24 Pkt/10m | 24 Pkt/10m | 4 Volt | 0 | 0 |
| 1754225640 | 12 Pkt/10m | 11 Pkt/10m | 4 Volt | 0 | 0 |
| 1754224436 | 22 Pkt/10m | 19 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754223233 | 19 Pkt/10m | 19 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1754222029 | 22 Pkt/10m | 18 Pkt/10m | 4 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)