This is the latest recevied telemetry packets stored in our database for station/object KJ5SZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758141168 | 451 | 650 | 0 | 0 | 0 |
| 1758139492 | 452 | 650 | 0 | 0 | 0 |
| 1758139373 | 446 | 647 | 0 | 0 | 0 |
| 1758135570 | 450 | 643 | 0 | 0 | 0 |
| 1758135451 | 449 | 644 | 0 | 0 | 0 |
| 1758135331 | 445 | 644 | 0 | 0 | 0 |
| 1758135211 | 445 | 645 | 0 | 0 | 0 |
| 1758133672 | 447 | 653 | 0 | 0 | 0 |
| 1758133433 | 432 | 653 | 0 | 0 | 0 |
| 1758133313 | 437 | 654 | 0 | 0 | 0 |
| 1758130521 | 434 | 655 | 0 | 0 | 0 |
| 1758130282 | 452 | 656 | 0 | 0 | 0 |
| 1758130162 | 447 | 654 | 0 | 0 | 0 |
| 1758130042 | 453 | 653 | 0 | 0 | 0 |
| 1758129923 | 449 | 650 | 0 | 0 | 0 |
| 1758129803 | 453 | 647 | 0 | 0 | 0 |
| 1758124443 | 450 | 639 | 0 | 0 | 0 |
| 1758124324 | 454 | 637 | 0 | 0 | 0 |
| 1758124204 | 449 | 634 | 0 | 0 | 0 |
| 1758119871 | 458 | 629 | 0 | 0 | 0 |
| 1758119633 | 457 | 624 | 0 | 0 | 0 |
| 1758115558 | 458 | 619 | 0 | 0 | 0 |
| 1758115438 | 468 | 617 | 0 | 0 | 0 |
| 1758115319 | 461 | 615 | 0 | 0 | 0 |
| 1758115199 | 454 | 612 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)