This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788862145 | 581 Count | 933 Count | 263 Count | 4.32 VDC | 0.14 VDC |
| 1788862042 | 576 Count | 931 Count | 263 Count | 4.28 VDC | 0.14 VDC |
| 1788791644 | 495 Count | 926 Count | 260 Count | 4.25 VDC | 0.14 VDC |
| 1788791342 | 494 Count | 925 Count | 260 Count | 4.26 VDC | 0.14 VDC |
| 1788791039 | 492 Count | 923 Count | 259 Count | 4.25 VDC | 0.14 VDC |
| 1788790736 | 491 Count | 922 Count | 259 Count | 4.27 VDC | 0.14 VDC |
| 1788788993 | 474 Count | 920 Count | 258 Count | 4.24 VDC | 0.14 VDC |
| 1788788690 | 473 Count | 919 Count | 258 Count | 4.24 VDC | 0.14 VDC |
| 1788788071 | 470 Count | 920 Count | 259 Count | 4.24 VDC | 0.14 VDC |
| 1788787769 | 468 Count | 918 Count | 258 Count | 4.23 VDC | 0.14 VDC |
| 1788787466 | 467 Count | 917 Count | 258 Count | 4.22 VDC | 0.14 VDC |
| 1788787419 | 462 Count | 916 Count | 258 Count | 4.22 VDC | 0.14 VDC |
| 1788787396 | 457 Count | 916 Count | 258 Count | 430 VDC | 7 VDC |
| 1788711232 | 453 Count | 916 Count | 258 Count | 428 VDC | 7 VDC |
| 1788710929 | 452 Count | 915 Count | 258 Count | 424 VDC | 7 VDC |
| 1788710626 | 450 Count | 913 Count | 257 Count | 422 VDC | 7 VDC |
| 1788710324 | 449 Count | 912 Count | 257 Count | 430 VDC | 7 VDC |
| 1788710020 | 447 Count | 910 Count | 256 Count | 429 VDC | 7 VDC |
| 1788709718 | 446 Count | 909 Count | 256 Count | 427 VDC | 7 VDC |
| 1788709415 | 444 Count | 907 Count | 255 Count | 431 VDC | 7 VDC |
| 1788709112 | 443 Count | 906 Count | 255 Count | 424 VDC | 7 VDC |
| 1788708809 | 441 Count | 904 Count | 254 Count | 423 VDC | 7 VDC |
| 1788708507 | 440 Count | 903 Count | 254 Count | 422 VDC | 7 VDC |
| 1788708204 | 439 Count | 902 Count | 254 Count | 428 VDC | 7 VDC |
| 1788707901 | 437 Count | 900 Count | 253 Count | 425 VDC | 7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)