This is the latest recevied telemetry packets stored in our database for station/object OK1JRA-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754211218 | 286 Count | 1 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1754209417 | 285 Count | 1 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1754207616 | 284 Count | 1 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1754205815 | 283 Count | 1 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1754204015 | 282 Count | 1 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1754202222 | 281 Count | 1 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1754200421 | 280 Count | 1 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1754198620 | 279 Count | 1 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1754196820 | 278 Count | 1 Count | 0 Count | 4.03 VDC | 0 VDC |
| 1754195019 | 277 Count | 1 Count | 0 Count | 4.08 VDC | 0 VDC |
| 1754193218 | 276 Count | 1 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1754191418 | 275 Count | 1 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1754189617 | 274 Count | 1 Count | 0 Count | 4.07 VDC | 0 VDC |
| 1754187816 | 273 Count | 1 Count | 0 Count | 4.03 VDC | 0 VDC |
| 1754186015 | 272 Count | 1 Count | 0 Count | 4.03 VDC | 0 VDC |
| 1754184215 | 271 Count | 1 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1754182414 | 270 Count | 1 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1754159021 | 257 Count | 1 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1754157221 | 256 Count | 1 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1754155420 | 255 Count | 1 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1754153619 | 254 Count | 1 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1754151818 | 253 Count | 1 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1754150018 | 252 Count | 1 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1754148217 | 251 Count | 1 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1754146416 | 250 Count | 1 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)