This is the latest recevied telemetry packets stored in our database for station/object SP9CXD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788957240 | 283 Count | 491 Count | 127 Count | 3.97 VDC | 0.16 VDC |
| 1788956340 | 278 Count | 489 Count | 127 Count | 4.25 VDC | 0.14 VDC |
| 1788955739 | 277 Count | 487 Count | 127 Count | 4.24 VDC | 0.14 VDC |
| 1788955139 | 276 Count | 486 Count | 127 Count | 4.23 VDC | 0.14 VDC |
| 1788954538 | 275 Count | 482 Count | 127 Count | 4.23 VDC | 0.14 VDC |
| 1788953937 | 274 Count | 477 Count | 127 Count | 4.23 VDC | 0.14 VDC |
| 1788953337 | 273 Count | 476 Count | 127 Count | 4.28 VDC | 0.14 VDC |
| 1788952736 | 271 Count | 469 Count | 126 Count | 4.3 VDC | 0.14 VDC |
| 1788947205 | 265 Count | 467 Count | 126 Count | 4.23 VDC | 0.14 VDC |
| 1788946605 | 264 Count | 466 Count | 126 Count | 4.21 VDC | 0.14 VDC |
| 1788946004 | 263 Count | 465 Count | 126 Count | 4.23 VDC | 0.14 VDC |
| 1788945403 | 262 Count | 462 Count | 126 Count | 4.21 VDC | 0.14 VDC |
| 1788944803 | 261 Count | 461 Count | 126 Count | 4.3 VDC | 0.16 VDC |
| 1788944202 | 260 Count | 460 Count | 126 Count | 4.23 VDC | 0.16 VDC |
| 1788943601 | 259 Count | 457 Count | 126 Count | 4.27 VDC | 0.14 VDC |
| 1788943001 | 258 Count | 456 Count | 126 Count | 4.22 VDC | 0.14 VDC |
| 1788942400 | 257 Count | 455 Count | 126 Count | 4.32 VDC | 0.14 VDC |
| 1788941799 | 256 Count | 452 Count | 126 Count | 4.32 VDC | 0.14 VDC |
| 1788941199 | 255 Count | 451 Count | 126 Count | 4.23 VDC | 0.14 VDC |
| 1788940598 | 254 Count | 450 Count | 126 Count | 4.25 VDC | 0.14 VDC |
| 1788885602 | 248 Count | 447 Count | 126 Count | 4.24 VDC | 0.14 VDC |
| 1788885002 | 247 Count | 446 Count | 126 Count | 4.31 VDC | 0.14 VDC |
| 1788884401 | 246 Count | 439 Count | 126 Count | 4.27 VDC | 0.14 VDC |
| 1788883800 | 245 Count | 437 Count | 126 Count | 4.24 VDC | 0.14 VDC |
| 1788883199 | 244 Count | 436 Count | 126 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)