This is the latest recevied telemetry packets stored in our database for station/object M0MFS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
---|---|---|---|---|---|
1753595915 | 223 Count | 49 Count | 16 Count | 3.96 VDC | 0.14 VDC |
1753594109 | 221 Count | 48 Count | 15 Count | 3.99 VDC | 0.14 VDC |
1753592303 | 219 Count | 47 Count | 14 Count | 3.99 VDC | 0.14 VDC |
1753590497 | 217 Count | 46 Count | 13 Count | 4.05 VDC | 0.14 VDC |
1753588692 | 215 Count | 45 Count | 12 Count | 3.96 VDC | 0.14 VDC |
1753586886 | 213 Count | 44 Count | 11 Count | 4.07 VDC | 0.14 VDC |
1753585080 | 211 Count | 43 Count | 10 Count | 3.9 VDC | 0.14 VDC |
1753583274 | 209 Count | 42 Count | 9 Count | 3.99 VDC | 0.14 VDC |
1753581468 | 207 Count | 41 Count | 8 Count | 3.93 VDC | 0.14 VDC |
1753579736 | 206 Count | 41 Count | 8 Count | 4.08 VDC | 0.14 VDC |
1753577930 | 205 Count | 41 Count | 8 Count | 3.91 VDC | 0.14 VDC |
1753576124 | 204 Count | 41 Count | 8 Count | 3.9 VDC | 0.14 VDC |
1753574319 | 203 Count | 41 Count | 8 Count | 3.95 VDC | 0.14 VDC |
1753572513 | 202 Count | 41 Count | 8 Count | 4.03 VDC | 0.14 VDC |
1753570707 | 201 Count | 41 Count | 8 Count | 4 VDC | 0.14 VDC |
1753568901 | 200 Count | 41 Count | 8 Count | 4 VDC | 0.14 VDC |
1753567095 | 199 Count | 41 Count | 8 Count | 4.01 VDC | 0.14 VDC |
1753565290 | 198 Count | 41 Count | 8 Count | 4.07 VDC | 0.14 VDC |
1753563483 | 197 Count | 41 Count | 8 Count | 4.05 VDC | 0.14 VDC |
1753561677 | 196 Count | 41 Count | 8 Count | 3.93 VDC | 0.14 VDC |
1753559872 | 194 Count | 40 Count | 7 Count | 4.08 VDC | 0.14 VDC |
1753558128 | 193 Count | 40 Count | 7 Count | 4.05 VDC | 0.14 VDC |
1753556323 | 192 Count | 40 Count | 7 Count | 3.98 VDC | 0.14 VDC |
1753554517 | 191 Count | 40 Count | 7 Count | 3.99 VDC | 0.14 VDC |
1753552711 | 190 Count | 40 Count | 7 Count | 3.9 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)