This is the latest recevied telemetry packets stored in our database for station/object IW9GTR-DP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1753677304 | 405 Count | 558 Count | 341 Count | 4.19 VDC | 0 VDC |
| 1753676094 | 394 Count | 546 Count | 332 Count | 4.23 VDC | 0 VDC |
| 1753674884 | 380 Count | 525 Count | 320 Count | 4.19 VDC | 0 VDC |
| 1753673674 | 367 Count | 507 Count | 309 Count | 4.28 VDC | 0 VDC |
| 1753672464 | 354 Count | 489 Count | 298 Count | 4.28 VDC | 0 VDC |
| 1753671254 | 342 Count | 470 Count | 288 Count | 4.28 VDC | 0 VDC |
| 1753670044 | 329 Count | 451 Count | 277 Count | 4.28 VDC | 0 VDC |
| 1753669016 | 321 Count | 437 Count | 271 Count | 4.26 VDC | 0 VDC |
| 1753667811 | 308 Count | 417 Count | 260 Count | 4.25 VDC | 0 VDC |
| 1753666596 | 296 Count | 398 Count | 250 Count | 4.28 VDC | 0 VDC |
| 1753665386 | 284 Count | 384 Count | 240 Count | 4.25 VDC | 0 VDC |
| 1753664176 | 270 Count | 366 Count | 228 Count | 4.22 VDC | 0 VDC |
| 1753662966 | 256 Count | 349 Count | 216 Count | 4.22 VDC | 0 VDC |
| 1753661757 | 243 Count | 330 Count | 205 Count | 4.23 VDC | 0 VDC |
| 1753660547 | 229 Count | 308 Count | 193 Count | 4.25 VDC | 0 VDC |
| 1753659337 | 216 Count | 291 Count | 182 Count | 4.25 VDC | 0 VDC |
| 1753658127 | 204 Count | 275 Count | 172 Count | 4.22 VDC | 0 VDC |
| 1753656918 | 193 Count | 263 Count | 163 Count | 4.29 VDC | 0 VDC |
| 1753655708 | 178 Count | 246 Count | 150 Count | 4.28 VDC | 0 VDC |
| 1753654498 | 166 Count | 231 Count | 140 Count | 4.21 VDC | 0 VDC |
| 1753653288 | 152 Count | 210 Count | 128 Count | 4.23 VDC | 0 VDC |
| 1753652078 | 141 Count | 194 Count | 119 Count | 4.22 VDC | 0 VDC |
| 1753650854 | 130 Count | 181 Count | 110 Count | 4.25 VDC | 0 VDC |
| 1753649645 | 118 Count | 164 Count | 100 Count | 4.26 VDC | 0 VDC |
| 1753648435 | 104 Count | 148 Count | 88 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)