This is the latest recevied telemetry packets stored in our database for station/object SP2SGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762237060 | 126 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762236159 | 125 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762235258 | 124 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762234358 | 123 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762233457 | 122 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762232556 | 121 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762231656 | 120 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762230755 | 119 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762229855 | 118 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762228954 | 117 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762228053 | 116 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762227153 | 115 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762226252 | 114 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762225351 | 113 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762224451 | 112 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762223550 | 111 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762222650 | 110 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762221749 | 109 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762220848 | 108 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762219948 | 107 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762219047 | 106 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762218146 | 105 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762217246 | 104 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762216432 | 103 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762215532 | 102 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)